Read more in the December 2009 issue of RECORDING MAGAZINE WWW.RECORDINGMAG.COM
DESCRIPTION: The industry standard C7 Vocal Booth snaps together with 5 preassembled Walls, 1 Ceiling (top) and 1Base (bottom). All parts come completely finished and ready for final assembly. Each Wall snaps into place at its bottom and top assembly with absolutely no screws or hardware needed to assemble.It takes approximately30 min to assemble or dismantle the C7 Vocal Booth. The 7 parts; sides, top, and bottom of the C7 Vocal Booth are constructed of ½ in. maple wood and all sound proofing including 701 corning with proper dimension spacing inside the Walls, Ceiling, and Floor are pre-made and completely constructed for the best quality of sound.
Dimensions of the C7 Vocal Booth are as follows:
The bottom and top of the C7 Vocal Booth are well constructed and snap into place over the top and bottom of the walls. An outside exhaust fan and forced air conditioning unit (silent running) are mounted to the top and isolated from the C7 Vocal Booth. It comes equipped with separate control for speed of amount of airflow. At the rear of the back wall an exhaust duct is used for return air movement. The C7 Vocal Booth is equipped with an electrical receptacle for 120 VAC included with booth to run lights or instrument amplifiers and etc. XLR and Stereo Jacks are preinstalled inside the C7 Vocal Booth and mounted to the back wall for Microphone, Guitar and Headsets use.
Design Advantages for the C7 Vocal Booth:
25651 Atlantic Ocean Dr. Suite A-16
Lake Forest, CA 92630